Grundfos AP 12.40.08.A1

Rp11.600.000 Rp8.700.000

Unilift AP12 adalah pompa submersible single stage, dengan impeller semi terbuka, yang dirancang untuk memompa air drainase yang mengandung partikel hingga ukuran 12mm.
Unilift AP12 cocok untuk pengoperasian otomatis serta manual dan dapat digunakan dalam instalasi permanen atau sebagai pompa prtabel. Pompa ini mudah diinstal karena dilengkapi dengan pegangan agar mudah dibawa dan kabel listrik 10m.
Unilift AP12 sebagian besar terbuat dari stainless steel dengan lengan stainless steel untuk mendinginkan saat pengoperasian. Selongsong pompa dibuat dalam satu bagian stainless steel, saringan hisap dijepitkan dirumah pompa agar mudah dilepas saat perawatan.


Submersible drainage pump type
Vertical single-stage stainless steel submersible pump with vertical discharge port and integrated submersible 1-phase totally enclosed motor in insulation class F with thermal overload protection.The pump is fitted with suction strainer and level switch for automatic start and stop.The impeller is a SEMI OPEN impeller for 12 mm free passage suitable for pumping groundwater, surface water, rain water and similar.The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil.

The pump has a riser pipe, a cooling jacket for continuous cooling of the motor by the pumped liquid and long-life deep-groove greased-for-life ball bearings.

The pump is ready for use as it is fitted with carrying handle and is supplied with a 5 m mains cable. The mains cable is of the plug type with glass sealing compound in the socket to prevent penetration of humidity into the stator windings.

Pumped liquid: Any Newtonian liquid
Liquid temperature range: 0 .. 55 °C
Density: 998.2 kg/m³
Type of impeller: SEMI OPEN
Maximum particle size: 12 mm
Pump housing: Stainless steel
DIN W.-Nr. 1.4301
AISI 304
Impeller: Stainless steel
DIN W.-Nr. 1.4301
AISI 304
Pump outlet: Rp 1 1/2
Maximum installation depth: 2 m
Electrical data:
Type of motor: PSC
C run: 16 µF
Power input – P1: 1.3 kW
Mains frequency: 50 Hz
Rated voltage: 1 x 230 V
Rated current: 5.9 A
Cos phi – power factor: 0,99
Rated speed: 2780 rpm
Capacitor size – run: 16 µF/400 V
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Length of cable: 5 m
Type of cable plug: AU
Net weight: 12.6 kg
Gross weight: 14.1 kg



Grundfos Pumps

Additional information

Weight 14.1 kg
Dimensions 25 × 27 × 43 cm


There are no reviews yet.

Be the first to review “Grundfos AP 12.40.08.A1”

Your email address will not be published. Required fields are marked *

two × four =

WhatsApp chat